Maintainer

Ideal to safely maintain polished marble, terrazzo and agglomerate floor surfaces quickly and easily. It is for commercial use only and must be used with a 175 rpm floor machine with #0 or #1 steel wool pads.

Recommendations:

Always test on a small area before using.

Natural stone should be protected with SOLVENT BASED SEALER.

Follow the recommended cleaning procedures for STONE FLOOR CLEANER.

If heavy abrasions or scratches are on the surface, use HONING POWDER first, and then polish with CRYSTALLIZER

If scratches are deep and severe, they can be removed with diamond pads.

Cover all surfaces that are not stone.

Always wear protective clothing such as safety goggles, gloves and footwear.

Always work small areas at a time until you become familiar with the product.

In the event of a medical emergency, call 1-800-424-9300.

Always use protective gloves when applying by hand.

Directions for Use:

POLISHED MARBLE, TERRAZZO, LIMESTONE AND AGGLOMERATE FLOORS (Using a 175 rpm buffing machine):

Cover all surrounding surfaces that are not marble.

Strip off all topical coatings from the floor surface.

Dust/dry mop and clean the floor surface with STONE FLOOR CLEANER before using.

Spray 3 streams of CRYSTALLIZER undiluted on a small 3' X 3' area.

Immediately begin buffing with a #0 or #00 steel wool pad.

Buff the CRYSTALLIZER slowly into the marble until the floor is dry and polished. (Do not let the CRYSTALLIZER dry on the floor by itself).

Continue buffing until all the CRYSTALLIZER is dry and any streaks have disappeared. (Dry buffing with steel wool will remove the polish from the stone). (If streaking develops, flip the steel wool pad to the clean side or use a new pad).

Dry/dust mop the steel wool particles off of the floor.

After the process, damp mop with STONE FLOOR CLEANER and clean daily with STONE FLOOR CLEANER.

Only use CRYSTALLIZER if a wear pattern begins to form.

By Hand or Machine:

COUNTERTOP/WALL POLISH was designed to polish surfaces by hand or machine. It will give the surface a clean and beautiful appearance with minimal effort. COUNTERTOP/WALL POLISH will help prevent the stone from etching and burning from spills or perfume, alcoholic beverages, cosmetics, juices, and personal hygiene products. It will even help prevent glass rings from forming.

Recommendations:

Always test on a small area before using to determine if the product is applicable.

All stains, moisture, and dirt must be removed prior to the polish application and must remain dry 24-48 hours after application.

Directions for Use:

APPLY THE POLISH (tabletops, countertops, walls, vanities, columns):

Spray surface with STONE COUNTERTOP CLEANER and wipe off with a soft clean cloth.

Shake polish bottle first.

Rub the polish to the stone surface in a circular motion with a dry soft towel.

Let the polish dry to a haze.

Buff off the polish with a soft dry cloth in a circular motion.

If a haze remains on the surface after polishing, remove it by spraying STONE COUNTERTOP CLEANER onto the surface and wipe clean.