A special product from the LITHOFIN range. It is a ready to use emulsion that produces an abrasive resistant, water resistant protective film with satin finish. This reduces the superficial marking scuffing incidence in order to maintain the floor with ease. The surface will retain its natural light colour, will be resistant to oil, grease, water etc. and is easy and safe to use.

Application: for many types of rough and honed finished limestone and similar natural stone, concrete moulded slabs, terracotta flooring of hand made and semi hand made types like Mexican, Italian, Spanish etc. Only for use internally on preimpregnated surfaces.

Directions: Apply neat uniformly with a cloth, sponge or roller to a clean dry surface. The next application may follow within one to two hours. Please note: on average it is necessary to apply between two and three coats to achieve a uniform appearance. Do not walk on surface whilst it is drying. Do not use on polished surfaces.

Coverage: approximately 7 - 12 m/litre, on impregnated surfaces.

Drying time: about one hour depending upon ambient temperature.

Application: For the thorough cleaning of all stone and tile surfaces and of other surfaces resistant to solvents and water. Lithofin WEXA can be used everywhere for domestic and industrial use, inside and outside.

Directions: Depending on cleaning task dilute Lithofin WEXA with water between 1:4 and 1:20, apply and allow to work for 5-20 minutes. Scrub surface lightly during this period, but do not allow product to dry out. In obstinate situations, repeat the process or, possibly, use product less diluted or allow a longer period of treatment with brushing. Afterwards wipe up the dirty water and rinse surface with copious amounts of clean water.

Please note: Lithofin WEXA should not be used on solvent-sensitive surfaces, e.g. some plastics, rubber and the like. In case of doubt make a test application in an area not readily visible.

Coverage: About 10 m/Ltr. for use in less diluted form; up to 100 m/Ltr. with greater dilution.

Storage conditions: Keep cool and dry.

Contents: 5-15% : non-ionic surfactants, anionic surfactants; less than 5%: phosphate; solubilizer.

Safety: Keep out of reach of children.

An economical concentrate for achieving speedy maintenance and reliable care treatment in one operation. LITHOFIN EASY-CARE is suitable for all stone floors such as tiles, quarry tiles, terra cotta, natural stones such as marble, slate, travertine, honed limestone, and terrazzos conglomerate marble etc. regardless of whether the surface are naturally rough or polished, untreated or sealed, glazed or absorbent. LITHOFIN EASY-CARE contains no wax and, consequently, does not build up layers. It leaves a soil-repellent and slipretarding film with a fresh pleasant odour. Due to its low alkaline properties LITHOFIN EASY-CARE cleans extremely well without bleaching. So stone floors become more attractive with repeated use, i.e. the colour and structure becomes more pronounced.

Directions: LITHOFIN EASY-CARE is always added to the water used for washing at the rate of one squeeze per bucket. Rather more should be used for the first applications or for porous surfaces or to remove heavier soiling. Do not wash with clear water afterwards.

Contents: Natural soaps, 5-15% anionic surfactants, preservatives and auxiliary agents.

Safety: Keep out of reach of children.

Disposal: Can be added to waste water after dilution. After internal washing, the containers can be recycled through collection systems.

Note: We recommend LITHOFIN WEXA as a basic cleaner and LITHOFIN CERAMIC-CLEAN for cleaning tiles and sanitary fittings

Application: For all sorts of natural and artificial stone surfaces, and also for polished marble, for protection against formation of stains and making maintenance easier. Essential for kitchen, bathroom, window-ledges, tables and other sensitive surfaces.

Directions: The surface has to be completely dried out, clean and stain-free. Apply Lithofin STAIN-STOP with brush, roller or cloth and avoid foam. Treat any slightly absorbent material (polished marble) within 30 minutes several times, then wipe off thoroughly any excess with a rag, moistening if necessary with product Attention! Important ! The product must soak into the surface, do not allow to dry before removing any excess from surface. No visible product should dry on the surface; wipe away carefully.

Caution: Apply a test-piece surface first. Glass, polished surfaces, plastics, solvent-sensitive surfaces etc. must be protected against splashes. Non-absorbent surfaces cannot be impregnated. It does not protect against the effect of acids.

Working temperature: Avoid application below 10 and over 22 C and in direct sunlight. Floor heating should be turned off.

Drying time: About 30-40 minutes. Fully effective after 24-48 hours.

Coverage: 5-12 m per litre (polished stone up to 20 m per litre).